MLT-JR Tracked Robot

Description

Initially The MLT-JR Tracked Robot is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots,
Basically is a smaller version of our LT2 and HD2 tanks but built with the same high level of quality, strength, power, etc.
This is not a plastic imported robot that will disappoint you.
MLT-JR Tracked Robot It performs exceptionally well for its size and is intended as a small maneuverable customizable tracked robot platform.
certainly The robot comes with a welded aluminum chassis, wheels hubs and tracks.
Accordingly Each track is driven by a planetary gear motor delivering smooth reliable power.
The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis.
Initially The tracks are molded 4 ply seamless tracks offering exceptional strength and quality.
Accordingly The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors.
MLT-JR Tracked Robot The robot uses differential steering (movement is based on two separately driven wheels placed.
Basically It can thus change its direction by varying the relative rate of rotation of its tracks).
The kit provides you with what you need to make a compact affordable All-Terrain tracked robot.
Dimensions (LxWxH): 12.5″ x 11″ x 4″
Weight: 6 pounds
Drive Method: Direct Drive
Speed and Payload Chart: Tracked Robots

- With default selected options: 6 to 10 pounds depending on use
- Payload range with available options: 3 to 15 pounds

- With default selected options: 179 feet per minute (2.0 mph)
- Top speed range with available options: 71 to 250 feet per minute
Includes the chassis, hardware, and wiring kits.
Gear Motors: Two (2) IG32P 190 RPM Gear Motors
Initially Tracks: One (1) MLT-JR Pair of Molded Spliceless Tracks and Wheels Set.
MLT-JR Tracked Robot Battery System: Two(2) 11.1V 2200 mAh Lipo Batteries providing roughly 2 hours of operation.
Certainly Motor Controller(s): One (1) Sabertooth Dual 12A RC Motor Controller.
Basically Control System: One (1) FLYSKY FS-i6 2.4Ghz 6Ch transmitter and receiver.