IG42-SB2 Tube Mount Robot Platform

  • This IG42-SB2 Tube Mount Robot Platform  is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots.

$2,899.54

Category

Description

  • This IG42-SB2 Tube Mount Robot Platform  is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots.
  • Basically This is a 2WD robot that uses our IG42 motors and can use 6 inch tires10 inch standard tires, or 10 inch tiller tires.
  • It uses our motor mount tubes to mount two IG42 motors and a single ball bearing to take most of the load off of the motor shaft.
  • IG42-SB2 Tube Mount Robot Platform is a single caster is mounted in the rear of the robot.
  • The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body.
  • Initially It can thus change its direction by varying the relative rate of rotation of its wheels).
  • The 2WD robot is excels at turning with heavy loads and on high friction surfaces where a 4WD robot might have trouble.
  • See our ATR page for more details about our All Terrain Robots.
  • Certainly If you need this IG42-SB2 Tube Mount Robot Platform customized beyond the provided options below.
  • The TP-111-042 kit allows for a wide range of customizations based on your needs.
  • We offer a variety of motor controllers, batteries, RC controllers, and encoders so you can configure the robot.
  • The weight of the robot will vary depending on how the robot is configured (batteries are the main cause of this).
  • IG42-SB2 Tube Mount Robot Platform This is a configurable robot kit with selectable options at the bottom of the page.
  • The options are pre-selected to reflect our recommended configuration but can be changed to suit your needs.

Standard Configutration:

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “IG42-SB2 Tube Mount Robot Platform”